Features:
Voltage, resistance, continuity, capacitance
Input terminal for ac and dc current measurements to 10 A and current
Backlit display
Data hold
Diode test, plus frequency and duty cycle measurements
Specification:
Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of: ±([% of Reading] [Number of Least Significant Digits])
Accuracy Specifications
AC Volts
(40 Hz to 500Hz)1RangeResolutionAccuracy
6.000 V
60.00 V
600.0 V0.001 V
0.01 V
0.1 V1.0 % 3
DC Volts6.000 V
60.00 V
600.0 V0.001 V
0.01 V
0.1 V0.5 % 3
AC Millivolts600.0 mV0.1 mV3.0 % 3
Diode Test22.000 V0.001 V10 %
Resistance
(Ohms)400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ0.5 % 3
0.5 % 2
0.5 % 2
0.5 % 2
0.5 % 2
1.5% 3
Capacitance350.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF2 % 5
2 % 5
5 % 5
5 % 5
5 % 5
5 % 5
Frequency4
Hz
(10 Hz – 100 kHz)50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz0.1 % 3
Duty Cycle41 % to 99 %0.1 %1 % typical 5
AC Current
(40 Hz to 200 Hz)4.000 A
10.00 A0.001 A
0.01 A1.5 % 3
DC Current4.000 A
10.00 A0.001 A
0.01 A1.5 % 3
All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.
Specifications do not include errors due to test lead capacitance and capacitance floor (may be up to 1.5 nF in the 50 nF range).
All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
Typical means when the frequency is at 50 Hz or 60 Hz and the duty cycle is between 10 % and 90 %
FunctionOverload ProtectionInput Impedance (Nominal)Common Mode Rejection RatioNormal Mode Rejection Ratio
AC Volts600 V 1>10 MΩ <100 pF 2>60 dB at dc,
50 Hz or 60 Hz−
AC Millivolts600 mV>1M, <100 pF>80 dB at 50 Hz or 60 Hz−
DC Volts600 V 1>10 MΩ <100 pF>100 dB at dc,
50 Hz or 60 Hz>60 dB at 50 Hz or 60 Hz
6 x 105 V Hz Max
For mV (AC), input impedance is approximately 1 MΩ.
General Specifications
Maximum Voltage Between any Terminal and Earth Ground600 V
Display (LCD)6000 counts, updates 3/sec
Battery Type2 AAA, NEDA 24A, IEC LR03
Battery Life200 hours minimum
Temperature
Operating0 °C to 40 °C
Storage-30 °C to 60 °C
Relative Humidity
Operating HumidityNon-condensing when <10°C
≤90 % at 10 °C to 30 °C; ≤75 % at 30 °C to 40 °C
Operating Humidity, 40 MΩ Range≤80 % at 10 °C to 30 °C; ≤70 % at 30 °C to 40 °C
Altitude
Operating2000 m
Storage12,000 m
Temperature Coefficient0.1 X (specified accuracy) /°C (<18 °C or >28 °C)
Fuse Protection for Current Inputs11A, 1000V Fast Fuse, Fluke specified part only
Size (HxWxL)142 mm x 69 mm x 28mm
Weight200 g
IP RatingIEC 60529: IP 40
SafetyIEC 61010-1: 600 V CAT III, Pollution Degree 2
Electromagnetic EnvironmentIEC 61326-1: Portable
Electromagnetic CompatibilityApplies to use the Korea only. Class A Equipment (Industrial Broadcasting and Communication Equipment)1
1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.
