NOTICES:THE ONLY AUTHENTIC KS600 IS SOLD BY Uniharpa.
Kystar has developed a variety of video processing products.With advanced control and image processing technology,we can not only switch between signals fast and stably
but also process the images in multiple levels.
WHAT YOU GET:
1xKS600
1xVGA/DVI/HDMI/USB/Power adaptor
1xUser Manual
1xSoftware installation Disk
Q & A :
Q: Please briefly describe the connection of graphics card, video processor, sending card, receiving card and LED screen.
A: The DVI (VGA) output port of the graphics card is connected to DVI-IN (VGA-IN) input of the video processor, DVI-OUT output of the video processor is connected to the sending card,
the sending card is connected to the terminal receiving card in the back of the screen through the network cable, the receiving card is connected to respective screen and the entire large screen by cascading.
Q: How many sending cards can be installed to the video processor? Why sending cards can be installed with no PCI slot inside the processor?
A: Up to two sending cards can be installed.
PCI slots in the computer are used to supply power for the sending card rather than video signal transmission, while the video processor provides 5V power via four-pin cable, and thus it is possible to install sending card.
Q: What is the meaning of output resolution? Does it need to be set in advance?
A: Output resolution is the maximum output range of the processor. This value should be larger than the actual pixels of the LED screen. It will change automatically when the image parameters are adjusted, and don’t need to set up in advance.
Q: How to set keypad lock of the video processor? How to unlock?
A: Menu - Advanced - Expert setup - Keypad lock; the keypad is locked when this option is turned on; press MENU for ten times to unlock.
