SYSTEM:This RFID ID Card is used to clone 125Khz FRID card.Supported blank labels: 125Khz T5577, 125Khz EM4305, 125Khz CET5200,125Khz EM4100, 125Khz EM410X. ADVANTAGE:built in led lights and buzzer individual indicator. SUPPORT read write frequency: 125Khz EM4100 / EM410X or compatible card /tag format. NOTE:Please use the card we gave to test, if reader works, but your own card can not be read or copy, means your card is not 125KHz. WIDELY APPLICATION:can be used for elevator card,access control system,Parking card,proximity card,Work Timecard ETC or home and office door,etc. Please Note: 1.These cards in package are blank cards, read directly may not be successful.Insufficient read and write may occur when the battery is low. 2.The product does not support the category and frequency of the automatic identification card. If there is no response, it means that it cannot be used. Please place the order according to the actual demand. 3.Whether the copied card can replace the original card work is subject to actual conditions. 4.When the equipment does not need to work, please cut off the power supply, take out the battery and put it in a dry and cool place. 5.If it is not used for a long time, please keep it on and off at least once a month. Product specifications: Material: ABS Supported blank labels: T5577, EM4305, CET5200 Working frequency: 125Khz Power: 2 AAA batteries (excluding batteries) Working status Led: read, write Button: read button, write button Handheld RFID burner size: 11.5 x 6.8cm 4.53 x 2.68inch Weight: 155 grams How to clone: 1.Push the power switch on the left side of the device, the device beeps 2 or 3, and the LED flashes at the same time to indicate normal operation. 2.Place the original card before copied in the sensing area on the left side of the device, press the READ button, the device beeps 2 times (while the PASS button is on), indicating that the data is successfully read. 3.Put a new blank or empty card placed in the device
