Interior rearview mirror computer mobile phone bicycle motorcycle car can be pasted furniture can also be pasted
If you don't like it, you can peel it off at any time, leaving no residual glue and affecting the original car
Carbon fiber sticker, not only has waterproof, sunscreen, smooth surface, stretch strong durability and other advantages, with the characteristics of convenient replacement. It is the choice of car friends who decorate their cars.
3 is a layer of protective film on the surface of the film, to prevent the construction of the scratch of the film, affect the effect. As the protective film is relatively thin, some of the production will have some wrinkles, but does not affect the use.
· whole film covering: no splicing, no seam, no trace, with air conduction, no need to worry about bubbles,
· thin, strong and tough: the film is of thin thickness, with stronger flexibility and ductility (it can be stretched arbitrarily after heating, and then it can be shaped and not shrink after returning to normal temperature), which can show the ideal bending on the smaller arc surface, and the adhesive force is durable;
· durable: the environment is resistant to yellowing and the service life is up to 4 years;
· isolated from corrosion: able to resist most petroleum, oil, fuel, fat solvent, weak acid, weak base, weak salt, and isolated from acid rain, gravel guano, oil and other sustained damage;
· wear resistance and scratch resistance: the toughness recovery force is increased by more than 10 times, which can automatically heal small scratches and resist general scratches, collisions and abrasions;
· excellent light filtering: refract and filter harmful light, block the damage caused by strong light and UV to car paint, and protect the gloss and durability of the original paint;
Heat insulation flame retardant: to adapt to the temperature difference and 40 ℃ to + 90 ℃, good heat insulation and temperature inert guide effect, fire flame retardant;
· lamination: no wrinkles, no bubbles, no cracking, no warping;
· convenient maintenance: reduce working hours and costs of car washing and waxing;
· no residual glue: easy to paste, easy to remove, no damage to the paint surface, no residual
· environmental protection: no toxic and side pollution to the paint, human body or nature.
[usage]
【 dry paste method 】
For cars, motorcycles or small cars
Use tools: clean cloth, scraper or credit card
1, clean the body of the paste position, conditional can use no fiber off the cloth dipped in with 50% alcohol or isopropyl alcohol or acetone to scrub, also available soap water; The surface cleaned by solvent needs to wait for the solvent to evaporate before it can be pasted.
2, in general, slowly side, side with a tool to scrape, while the bottom of the paper.
3. If the stickers are less than 10cm in length and width, you can tear off all the stickers and stick them again. But care must be taken not to cause accidental adhesion or fall off the ground to stick to the dust.
4, with a clean cloth or scraper [such as telephone CARDS or credit CARDS] on the film repeatedly hard obliquely wipe or scrape a few times, until there is no bubble in the sticker.
It is recommended not to expose yourself to the sun or wash your car within 24 hours.
【 wet paste method 】
Suitable for car or large car (double operation is recommended)
Use tools: spray pot, clean cloth, scraper, art knife, blower
1. Clean the surface to be pasted before preparing the pasting paper, spray glass water evenly on the surface to be pasted (after cleaning the car body, spray water on the body part to be pasted with a spray pot) -- mainly used to reduce the viscosity of the sticker and facilitate the adjustment of position.
2. After determining the position to be pasted, lift the car sticker from right to left [or from top to bottom] and press it on the car table with a rag, then paste it on the side, press it flat with a rag and reveal the backing paper on the side.
3, encounter door handle or anti - collision strip according to the situation to cut the material and package or load away.
4, timely adjustment, the general position of the graph will be determined without error, with the scraper repeatedly scraping water and bubbles, when using the scraper from the right to the left to scrape.
5, in case of the door and sewing with the knife are split, to the inner package.
6. Try to let the moisture in the stickers dry completely. If possible, use a hair dryer to heat and dry moderately.
Suggestion: do not insolate as far as possible within 24 hours, 48 hours should not wash the car.