【Line finding function】The point-to-point line finding function makes the line finding more accurate. The digital transmission anti-interference is suitable for RJ45 network cable interface, RJ11 telephone, metal wire, etc., and the required pair can be quickly found out from a large number of pairs.
【Operation steps】1.insert the crystal head of the network cable into the RJ45 of the transmitter On the network interface;2. Turn the function selector switch of the transmitter to the "scan" position, and "verify" will be on.3. press and hold the inching button of the receiver, touch each line with the probe, and when a sound is emitted, the line search is successful.
【Alignment function】It can detect whether the network cable sequence is correctly connected, and can be used as a network tester.Insert the two sides of the network cable crystal head into the R45 port of the line finder respectivelyTurn the function selection switch of the transmitter to the dest position, and the "validity" light will be judged according to the line sequence indicator.
【Judging Circuit Short Circuit Operation】The wire must be dead， start the test by clamping the short line.Operation method: alligator clip wires of corresponding colors, turn the transmitter switch to the line finding position, and the receiver probe touches the line. If it emits a "beep" sound, it means it is normal, move back along the wire. If there is no sound, it means that this is the short circuit position of the wire.
【Application】Telecommunication network line engineering and routine maintenance computer network line engineering Other metal conductor line engineering and maintenance work.
