➤Specificaiton:
Input Voltage: DC 12V
Wattage: 60W
Current: 5A
Motor Oil (40-60 degrees)
Flow Rate: approx. 1L / min
Diesel or heating oil: approx 250 L/H
Sound pressure level:70dB(A)
➤Size:
Oil Change Pump Extractor: 14*13cm
Inlet Hose Length: approx. 120cm
Inlet Hose Outer Diameter: 6mm/0.236''
Inlet Hose Inner Diameter: 4mm/0.157''
Outlet Hose Length: approx. 150cm
Outlet Hose Outer diameter: 12mm/0.472''
Outlet Hose Inner Diameter: 10mm/0.39''
Line Length: approx. 71cm/28''
➤Widely use:
Extracting motor oil from your vehicle without Mess & Specialised.
It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
➤Easy Installation:
Place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button.
This process is very simple and you can often do it by yourself to ensure your engine runs smoothly.
➤WARNING:
This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc)
Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running.
We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.
➤Package Included:
1 x Pump
1 x Outlet Hose
1 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
Note:
Please connect it correctly, otherwise it is easy to malfunction.
It is mainly used to extract waste gas from the car, not to refuel.
