【Ultra-thin High Density 10W Laser Beam】SCULPFUN S10 laser engraver module, 60W machine power and 10W laser output power, 0.06*0.06mm compressed spot enables finer laser engraving. It can cleanly cut 10mm thick wood and 5mm thick dark acrylic in a single pass, cut 10mm walnut and 6mm MDF and other high density materials, easily carve ceramics and stainless steel, etc.
【Powerful High-speed Air Assist】S10 laser module is equipped with a high-speed air assist nozzle. The difference of this nozzle is that it has an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the S10 spray airflow faster. For example, when using 30L/min, 0.03Mpa air compressor, the S10 nozzle will spray high-speed airflow up to 14.5m/s. This will greatly improve the cutting penetration and cutting efficiency.
【Engraving machine and its accessories】 match SCULPFUN Laser 360° Rotary Roller，SCULPFUN laser cutting 40*40cm honeycomb table and High Speed Airflow 0-30L/min air assist，Meet any of your job requirements.After placing the order, it will be delivered to your address in multiple packages at one time, saving you the shipping cost.
【Faster, Stronger, Cleaner】Combining advanced high-speed air assist and 10W high density laser, S10 shows comparable to industrial-grade wood cutting performance: First, the cutting efficiency is greatly improved, cut faster; Second, the cutting penetration is stronger, and many high-density woods can be cut; Third, the cutting surface is cleaner, the powerful airflow blows away the residue, so that there is no stain on the surface of the cutting object.
【Industrial Cutting Accuracy & 32-bit Motherboard】S10 adopts industrial high-precision linear slide rail X-axis, which makes it get industrial-grade engraving accuracy. When comparing the small engraving details, S10 does not have the wave lines that other ordinary engraving machines appear. The S10 motherboard uses 32-bit chips, with faster computing speed, and it still reserves Z-axis and limit switch functions to facilitate people to upgrade the engraving machine.
【Adjustable Laser Eye Shield & Quality Assurance】The S10 laser module is equipped with a detachable eye shield, which will not dazzle even without glasses. And if you don't need it, you can easily disassemble the eye shield. If you have any problem with our product, please freely contact us. We provide 12 months of product warranty and 24x7 friendly customer service.
