TeckWrap Holographic Black Carbon Fiber Car Vinyl
1. Product Type: Car wrap vinyl film
2. Dimensions: 1ft x 5ft (0.3 x 1.52m)
3. Material: PVC (high grade polymeric calendered film with air release channels)
4. Thickness of film (C=10 micron): 16C±0.5C Thickness of film with release liner: 34C±0.5C
5. Glue: Solvent-based adhesive
Release liner: White silicone-coated paper with a double-sided polyethylene coating
6. Application: Partial flat vehicles, furniture, laptop, cell phones and any other smooth surface
7. Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, away from direct sun light, keep in clean and dry place
Tips for wrapping:
Please make sure the car paint is original and vinyl recommend for car partial decoration only.
1.clean with alcohol and wrap vinyl must in no dust condition.
2.Temperature for wrapping must be 16-18 Celsius.
Dry application is recommended.
3.Don’t overstretch vinyl film over 10%.
Post-heating: 80 Celsius. Cure time 48 hours.
4.Use pre-stretch technique for wrapping of bumpers, mirrors, door handles and other curved elements.
5.Use “Primer” (glue promoter) for surfaces with low energy and compound curves.
6.After installation one should keep the vehicle in room temperature (18-23 Celsius) for at least 24 hours. Washed after 7 days. Forbidden to ride under rain or snow in 48 hours.
7.Please use a felt tipped squeegee to limit scratching. Any light scratches can self heal with heat once your finished installing.
Note:
The images, colors and finishes on screen are approximate.
