6710.BK universal lcd led tv controller driver board 8.9~42" 1920*1080 og TV AV VGA HDMI USB Media kit

Package list:

LCD driver board*1

e control *1

7 keyboard *1

baffle*1

TV Format: og Signal

Input Interface: PC / HDMI / TV / AV / USB multimedia playing

Power Adapter: DC 12V 3-5A

Screen interface:DS 1ch 6/8-bit ,2ch 6/8-bit

Screen voltage: 3.3V / 5V / 12V (Jump cap)

Resolution: Support high screen resolution 1920 * 1080, 8.9-42 inchDS screen (support most of the panels,but not all)

Not only USB interface can be d to upgrade programs, but also can to play video/music/photo, basically formats are supported. You can also set a boot display tures or LOGO and Mirror Enable.

Program update method:

1. Prepare a USB f drive and download the program we provide

select the required from the file(select according your screen resolution)andcopy 6710.BKto the USB f drive.

2.set the voltage on board(it is according your screen input voltage :3.3v/5v/12v)

3.plug f drive to the board, and plug 7 key board,then plug power adapter,poweron. then you can see the light on key board will be fing. it ismean the board is installing program. (at this moment , don't let power off!)

4.ar few minutes, the led will be stop fing, mean finished. thenpower off, Pull out the USB , then plugds cable and . poweron . On screen "no signal" , done.

Note:

voltage should be set correctly(3.3v/5v/12v);

The power requirement of 12A;

don't let power off when installing program;

The screen line not to re and dislocation;

selectds cable and should according your panel specs.if you can'tselect, pls offer panel number to us, we will help you.

Configuration & General Precautions

1.Protect the board from static electricity to avoid damage to the IC.2.Keep the board away from conductor when it is working.3.Don’t pre, distort or disaemble the board.4.Clean the board with soft dry cloth when it’s dirty.5.Don’t switch on the power supply before panel is correctly connected.6.The brightne of panel is influenced greatly by temperature, you should measure it ar power on 10~30 minutes.7.Keep the board surface clean. Check the appearance of the board if there has any defective parts, such as damaged,weighty nick, etc.