Crown ct21055l 2 batteries operated drill - 14.4 volt-10 mm

Technical Specification

• Battery Type: Lithium-ion
• Rated Voltage: 14.4 V
• Battery Capacity: 1.5 Ah
• Battery Charging time: 60 min
• No-load speed: 0-400 / 0-1400 minˉ¹
• Chuck type: Keyless chuck
• Chuck tightening range: 0.8-10 mm
• Maximum torque (soft / hard): 19 / 30 Nm
• Drilling diameter in steel: 10 mm
• Drilling diameter in wood: 28 mm
• Maximum screw diameter: 7 mm
• Weight: 1.06 kg
  

Pack information

• EAN-code: 7640177420022
• Pack type: Plastic case
• Pack dimensions: 32 × 8.9 × 22.2 cm

Master carton information

• Pack type: cardboard box
• Pack dimensions: 55.5 × 33 × 24 cm
• Number of pieces: 6

Features:

Li-Ion battery

• Light, compact, longer duration, no memory effect

Keyless Chuck

• Enables fast manual changing of accessories without any special key

Step speed selection

• Allows to select the range of revolutions per minute for specific types of work

Electronic speed adjustment

• Speed is controlled form 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on

Variable torque

• Torque regulator enables adjustment of contact pressure and torque force

2 Function modes (Screw driving / drilling)

• Enables changing between 2 operation modes: Screw driving or Drilling (in wood, metal and plastic)

Reverse function

• It allows to change rotational direction

Quick Charge

• Allows full battery charging in only 1 hour

Delivery Set Includes

• Cordless drill / screwdriver
• User's manual
• Screwdriver bit (double head)
• Belt Clip
• Battery: 2 Pieces
• Power unit

• 14,4 V Rated voltage
• 1,5 Ah Battery capacity
• 0,8-10 mm Chuck tightening range
• 19 / 30 Nm Max. torque (soft / hard)

Li-Ion battery

Light, compact, longer duration, no memory effect.

Keyless chuck

Enables fast manual changing of accessories without any special key.

Step speed selection

Allows to select the range of revolutions per minute for specific types of work.

Electronic speed adjustment

Speed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.

Variable torque

Torque regulator enables adjustment of contact pressure and torque force.

2 function modes (screwdriving / drilling)

Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).

Reverse function

It allows to change rotational direction.

Quick charger

Allows full battery charging in only 1 hour time.