GLOTRENDS LE8202 2-Port Gigabit PCIe Ethernet Network Card, Gigabit Full Speed, 2 x RJ45 LAN Port, PCIe X1 Installation

2 Port PCIe X1 Gigabit Network Card: Convert PCIe X1 slot to 2 Gigabit Ethernet RJ45 ports. The advantage is that only 1 PCIE X1 slot is needed for installation and there is no need to waste PCIE X16 graphics slots.
2 Gigabit RJ45 ports at Full Speed Operation: With PCIe 1.0 X1=2.5Gbps upstream bandwidth, 2 ports can operate at 100/1000Mbps full speed simultaneously.
Wide Range of Applications: Windows Servers, Network Attached Storage (NAS), Soft Router and Linux PC, etc. Pre-installed 12cm regular-profile bracket. Come with 8cm low-profile bracket for 2U server or compact case.
Play and Plug, there is no need extra driver. But if your devices does not recognize the network card or the speed does not reach the 1000Mbps level, please reinstall the driver. (Note: Please make sure that both connected ports support 1000Mbps and that the connected cable is at least CAT5E)
Driver Download Link: https://drive.google.com/drive/folders/15UkeFpoDpkyQyv3zD8Z3MxaYZ_Es2Jxj?usp=sharing
OS Compatibility: Windows/Linux/MAC OS/DOS; Centos/RHEL/Ubuntu/Debian/DSM/OpenWrt/PFSense/OPNSerse/IKUAI; VMWare ESXi 5.x and 6.x/Proxmox/unRaid. (Does not support VMware ESXi 7.0 or above)
RTL8111H Chip supports multiple functions: Wake-on-LAN, Auto MDIX, IEEE 802.1Q VLAN tagging, Full Duplex flow control(IEEE 802.3x), 9Kbytes Jumbo frame, etc.