140.00AED
-
Lowest Price 140
-
Highest Price 140
- Recent Price Raise 0%
140.00AED
The APC Button is a small, robust and high performance 2.4 GHz indoor access point designed for SOHO and small to medium size enterprise applications. Unobtru sive design and operational robustness make it ideal for permanent installations on high walls or ceilings. This product is equipped with a high output power (up to 23 dBm) 802.11n MIMO radio which allows effective communication with older 802.11b/g equipment as well as newer standards based devices. Dual firmware image will allow safe software upgrades. The device will restart using the prior working firmware in the unfortunate event of an upgrade failure. The APC Button uses an advanced and feature-rich operating system which supports bridge/router and repeater modes (repeater mode allows the product to operate as an access point and as a station at the same time). It also provides a user-friendly Adobe Flex based GUI with instant reconfiguration (without a reboot), installation tools (site survey, delayed reboot, spectrum analyzer, ping, traceroute) and is compatible with our standalone802.11b/g/n 2.4 GHz radioIntegrated 3 dBi omni-directional antennaPowerful OSFree NMS (Infinity Controller)Small form factor (10 cm radius)Invisible smoke detector shape designCeiling and wall mounting optionIntegrated 3 dBi omni-directional antennaWLAN standard IEEE 802.11 b/g/n Radio mode MIMO 2x2 Operating modes Access point (auto WDS), Station, Station WDS, Repeater Radio frequency band 2.402-2.484 GHz Transmit power Up to 23 dBm (country dependent) Receive sensitivity Varying between -94 and -74 dBm depending on modulation Channel size 20, 40 MHz Modulation schemes 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK) 802.11 b: DSS (CCK, DQPSK, DBPSK) Data rates 802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps 802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11 b: 11, 5.5, 2, 1 Mbps Error correction FEC, Selective ARQ Duplexing scheme Time division duplex Type 2 x internal omni-directional antenna Gain 3 dBi Interface 10/100 Base-T, RJ45 Operating modes Bridge, Router WAN Static IP, DHCP client, PPPoE client NAT Routing w/ or w/o NAT Static routing Supported DHCP Client, Server, Relay Port forwarding Supported VLAN Supported for management and data Wireless security WEP, WPA/WPA2 Personal, WPA/WPA2 Enterprise, WMM, WACL User isolation Supported 802.11 N 15 Mbps 30 Mbps 45 Mbps 60 Mb