Lian Li Lancool 216 RGB Chassis Optimized for Air and AIO Cooling - Black

Lancool 216 - Airflow Focus

The Lancool 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.

Continuous Front To Top Mesh

To ensure adequate airflow is provided to the system, the Lancool 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel.

*Note: The mesh panel beside the PSU shroud chamber is removable but is also an integral part of the support mechanism for the side tempered glass panel. Remove with care.

Lancool 216 RGB Fans

The included 160 mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.

Air Cooling Mode / Water Cooling Mode

The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.

Hardware Compatibility

The Lancool 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280 mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.

Removable Top Radiator Bracket

The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.

PCIE Fan Bracket

The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120 mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120 mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.

Vertical GPU Compatible

The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.

Cable Management

The Lancool 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.

Water Cooling

Set lower, the motherboard leaves a 63 mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.

Front I/O Can Be Relocated

Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.