About technical support Please read the user manual carefully before installation. If you have any questions about this product, please contact us via email. We have a dedicated technical team to support you.
Kindly Notes:
-LPG, butane and propane cylinder must be used with the pressure reducing valve regulator of 28-30 mbar, 40-50 mbar and 28 mbar respectively.
-The gas inlet is on the bottom left and the water inlet is on the bottom right.
-How to increase the water pressure: increase the main water valve in house, increase the water input and use supercharged shower.
-In winter or if it is not used for a long time, the excess water inside the water heater should be released to avoid damage to the equipment. The water inside can be released by removing the inlet and outlet water pipes.
-If the gas water heater turns off during use, please switch to winter mode and set the water level and gas level to medium or higher.
-If the gas water heater cannot ignite or extinguish the fire a few seconds after ignition, please turn off the gas bottle first, then remove the gas pipe and turn on the device. When you hear the ignition sound and valve opening sound, connect the gas pipe and restart the device.
-Please don’t use excessive force to install and put gasket in water and gas hose to prevent internal copper pipe from twisting or breaking.
-If you receive the item with some water flowing from inside, please don’t worry, it’s normal. Because our equipment will undergo a series of safety tests after it is manufactured. So there might be a little bit water not air-dried, but it won’t have any effect.
-Please consult us or local technician if there's any problem during installation.
Package List:
1 x gas water heater
1 x pressurized shower
1 x shower holder
1 x water hose
1 x accessory bag
1 x user manual
