ميكنج تيك لوحة بناء مغناطيسية بطباعة ثلاثية الابعاد مزدوجة الجوانب مرنة مزخرفة مقاس 235 × 235 ملم مع اجزاء ساخنة بطباعة سطح بي اي اي لاكويلا اندر 3 وبرو وV2 وS1 واندر 5

The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
Double-sided PEI: Flexible PEI print bed has double-sided PEI coating, both sides can be use,both side is textured.
When printing is complete, let the plate cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
The size of flexible PEI build plate 235*235mm (9.25*9.25inch), it is applicable with for Creality 3D printer such as for Ender-3 Pro, for Ender-3 V2, for Ender-3, for Ender-3S, for Ender-3X, for Ender-5, for Ender-5 Pro, for CR-20, for CR-20 Pro and similarly sized machines.
Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.