Behringer MA6018 Auto Mixing Amplifier - Black

Product Features :

• Brand : Behringer
• Type : Amplifiers
• Color : Black
• Number of Amplifier : 1

• Audio Inputs : 8x Combo XLR/TRS mic/line
• 8x 5-Pin Euroblock mic/line (in parallel)
• 4x Stereo summed RCA auxiliary
• 1x 4-Pin Euroblock page input
• Input Impedance : Mic : -50 to 0 dBV at 600 Ohms (electronically balanced)
• Line : -27 to 0 dBV at 600 Ohms (electronically balanced)
• Auxiliary : -10 dBV at 10 k Ohms (unbalanced)
• Preamp Output : 70 V Input :
• 1x 5-Pin Euroblock
• Impedance : 0 dBV at 600 Ohms (balanced)
• 4 Ohms Input : 1x 5-Pin Euroblock
• Impedance : 0 dBV at 600 Ohms (balanced)
• Hi-Z and Lo-Z Preamp Output :
• 2x 5-Pin Euroblock
• Impedance : 0 dBV at 600 Ohms (balanced)
• Phantom Power : 24 VDC
• Switchable on inputs 1 to 8 and Tel/Page input
• Audio Outputs : Amplifier Output : 1x 4-Pin female Euroblock
• Lo-Z Output : 2x terminals at 4 Ohms
• Hi-Z : 2x terminals at 70/100 V (switchable)
• Direct Out : 8x 5-Pin Euroblock
• Z2/MOH Output : 1x 5-Pin Euroblock
• Output Impedance : 0 dBV at 600 Ohms (balanced)
• Dynamic Range : Mic : 65 dB
• Line : 80 dB
• THD and Noise : 0.5percent at 1 kHz (rated output)
• Frequency Response : 50 Hz to 18 kHz (± 2 dB)
• Tone Controls : Master :
• Low : ± 10 dB : at 100 Hz
• High : ± 10 dB : at 12 kHz
• Inputs 1 to 8 : Low : ± 15 dB at 100 Hz
• High : ± 15 dB at 12 kHz
• Channels : Lo-Z : 1x 4 Ohms (minimum)
• Hi-Z : 1x 70/100 V (switchable)
• Power Output : Lo-Z : 180 W RMS at 4 Ohms (minimum, 1percent THD at 1 kHz sine wave)
• Hi-Z : 180 W RMS (27 Ohms minimum at 70 V, 55 Ohms minimum at 100 V; 1percent THD at 1 kHz sine wave)
• Connections Remote : 1x 5-Pin Euroblock
• Common : -5 VDC at 100 mA (short-circuit protected)
• Remote Power : 5 VDC at 100 mA (current limited, short-circuit protected)
• RVC : 10 k Ohms linear taper potentiometer
• Aux Input Select : used in conjunction with wall remote to select aux feed
• Power On/Off : 5 VDC voltage make contact input, no open voltage
• Inputs 1 to 8 : no voltage make contact input; open voltage 5 VDC, short circuit less than 10 mA
• Indicators : Power : Yellow LED ring illumination
• Overload : Red LED ring illumination
• Output Level : LED VU meter (yellow and red when clipping)
• Power Supply : Mains Voltage : 100 to 120/220 to 240 VAC, 60/50 Hz (switchable)
• Mains Connector : Standard IEC receptacle
• Fuse : T 6.3 AH 250 V/T 3.15 AH 250 V
• Power Efficiency : 72percent maximum
• Power Consumption : Idle : 54 W
• 0.125 Power : 110 W
• 1/3 Power : 210 W
• Full Power : 500 W
• Dimensions : 3.5 x 17.0 x 16.0 inch
• Weight : 14.1 lb