ElecLab 7 Inch 800x480 DSI Touchscreen Monitor Capacitive LCD Display RS232/RS485 Speaker Bracket for RPI 4B 3B+ 3B 3A+ 2B B+

Features and Specs

The 7 LCD display is an LCD display which connects to the Raspberry Pi through the DSI connector.

It is capacitive touch screen.

It has 2x2W speaker.

It has 2 any angle damping hinge brackets.

It has brightness potentiometer and volume potentiometer.

It has an SSD adapter board mounting position.

It has rs232/rs485 interface.

It is compatible with Raspberry PI 1 model A+ B+/ PI 2 model B/PI 3 model A+ B B+/PI 4 model B nd 2B.

It doesn't need install driver.

The Physical resolution of LCD display is 800*480.

Power by Raspberry Pi or use 5V TypeC power adapter.

Package Includes

1 x 7 inch display

1 x TypeC USB cable

1 × DSI short cable

1 × DSI long cable

5 x pcb(audio board, micro usb power board, typeC usb power board, RPI3 usb board, RPI4 usb board)

1 x XH2.54 3Pin long cable

1 x touch pen

4 x M2.5x5 screw

4 x M2.5x10 screw

1 x straight screwdriver

2 x stand

1 x user manual

How to rotate the display 180 degrees

When setting up the display screen, you'd better plug in the mouse first, so that you can operate easily at any time

When use Bullseye, make sure that VC4-KMS-V3D is prohibited in config.txt

#dtoverlay = VC4-KMS-V3D