MAKINGTEC 3D Printing Magnetic Build Plate Dual Sided Textured Flex Printing Bed 235x235mm with PEI Surface Printing Hotbed Parts for Aquila Ender 3, for Pro, for V2, for S1, for Ender 5

The magnetic plate are very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
Double-sided PEI: Flexible PEI print bed has double-sided PEI coating, both sides can be use,both side is textured.
When printing is complete, let the plate cool down enough (to around 40C), then easily remove the prints. If the print is still stuck, just gently bend the steel plate and pop it off! After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
The size of flexible PEI build plate 235*235mm (9.25*9.25inch), it is applicable with for Creality 3D printer such as for Ender-3 Pro, for Ender-3 V2, for Ender-3, for Ender-3S, for Ender-3X, for Ender-5, for Ender-5 Pro, for CR-20, for CR-20 Pro and similarly sized machines.
Easy to install: Made of high quality stainless steel and strong magnetic base, stick the magnetic base to your build plate by peeling off the backing paper and sticking it to your bed, then place the steel plate onto the magnetic sheet. Keep the side with PEI facing up to print on. Please peel off the protective film on the surface before printing.