sourcing map LED Motion Sensor Switch DC 12-24V 6A PIR Infrared Body Detect Timer Controller for Automatic Lighting Bulbs LED Strips, White

The led motion sensor switch is an infrared detection controller, which uses infrared detection to control the switch of the load. It can be installed in an appropriate environment according to actual needs, such as a cupboard, cabinet, kitchen, stairs, etc.
The LED strip dimmer switch provides here is: Output Current: <6A; Voltage: DC 12-24V; Output Power: <24W(5V), <72W( 12V), <144W(24V); Size: 76x45x34 mm/2.99x1.77x1.34 inchh(L*W*H); Delay time: 1-10min (adjustable); Working temperature: -20-60℃
Adjustable delay for activation from 1 to 10 minutes. The on/off function is completely silent. Easy to install, connect the load line first, then the power line.
1. Connect the load line first, and then connect the wires. Before power on, ensure that there is no short circuit between the connecting wires; 2. There is a time-setting knob on the back of the controller. By rotating the knob, the delay off minutes of the switch can be set respectively. When someone is detected, the load lamp will be turned on; When the person leaves for a set number of minutes, the load lamp will automatically turn off.
1. Please don't expose it to direct sunlight, heaters, strong wind, or air conditioners. 2. Please don't fix it at obstacles that infrared rays cannot penetrate. 3. The controller signal output line and input line should be connected correctly.